Skip to content

Composite Wind Guards

Lorbrand Australia composite wind guards are designed in-house in accordance with AS1170 and are designed to be fitted along a conveyor system to shield the belt from the adverse effects of wind and act as a secondary guard to minimise the risk of contact with the conveyor during operation.
  • Wind guards prevent wind induced tracking issues, or belt lift when the belt is being operated unladen.
  • Minimise product loss, through less wind shear across the conveyor belt.
  • Corrosion-resistant for use in wet areas, for corrosive products and costal/marine areas (wharf belts)
  • For use around conveyor tramp metal magnets and discriminators
  • Used on conveyors with tracking issues, where traditional steel wind guards may damage the belt in the event of belt drift.
  • Don’t bend in high winds or from maintenance personnel damaging them during idler change outs.
  • No sharp edges, minimising the risk of injury
  • All composite wind guards are 100% recyclable
  • Galvanised steel wind guards available in the same sizes
  • Custom shapes and sizes available in our composite wind guard range
  • Our wind guards are fabricated both locally and by offshore partners
COMPOSITE WIND GUARD BROCHURE
Available Sizes

Our conveyor wind guards come in the following standard sizes and are supplied with nuts, bolts and washers either in galvanised or stainless steel.

Custom sizes and colours are available on request. 

  • 400mm x 285mm
  • 580mm x 430mm
  • 760mm x 430mm
  • Custom sizes in composite

Composite Wind Guards Product Range

Standard Composite Wind Guard
Composite Wind Guard With Inspection Cutout
Need help or more info? Send us a quick enquiry.
CONTACT US
2171 2159 1875 1867 1126 1118 1120 1122 1116 1114 1112 1107 1124 1128 1080